This lightweight Akrapovič Titanium exhaust is specially designed to meet the looks of the Z900RS. The Z900RS Slip-On muffler is fully EC/ECE approved and easy to install. This accessory is fitted as standard on the performance edition.
Akrapovič Black Titanium Slip-on type exhaust.
A combination of racing materials like titanium for the muffler outer sleeve and carbon fiber end cap give this exhaust system a racing touch. This homologated exhaust system is compliant with Euro 4 and Euro 5 regulations (emissions and noise) and has EC type-approval. The heat shield is included.
Give your Kawasaki a more sporty look with the hexagonal shaped Titanium Akrapovič muffler.
This lightweight slip-on is designed to be used together with our pannier system.
Consists of a stainless steel link pipe, stainless steel inlet/ titanium muffler outer sleeve, carbon fiber end cap, Carbon fiber muffler clamp and dual Akrapovič and Ninja 1000SX branded laser etched logo.
Carbon fiber heatshield set and fitting kit included.
Complies with the applicable European standards.
Give your Kawasaki bike a more sporty look and sound with this Akrapovič slip-on system. This lightweight slip-on system offers great performance. The combination of racing materials like titanium for the muffler outer sleeve and carbon fiber end cap give this exhaust system a racing touch. The heatshield is included. This homologated exhaust system is compliant with Euro5 regulations (emissions and noise) and has EC type-approval.
This slip-on muffler is made from beautifully crafted carbon fiber and offers less weight than the stock exhaust. You will notice an enriched tone and enhanced appearance with the Akrapovič Slip-On Exhaust for the Ninja ZX-6R motorcycle. This is a simple upgrade for your Ninja ZX-6R motorcycle. Heat Shield is included.
Arrow matt black exhaust system for Vulcan S.
Full system made of stainless steel with catalyst and carbon endcap. This system is lighter compared to the stock exhaust system and gives a deep sporty sound.
The exhaust system is homologated according to EU regulations (emissions and noise) and has ECE type-approval. (Euro 5)
The Slip-On Line represents the first step in exhaust tuning and gives a performance increase to the Z900. It has a smaller, shorter, conical design, all aimed at improving the bike's appearance. It is manufactured from high-grade lightweight titanium, offering a big weight savings over the stock muffler, and is finished with a hand-built carbon-fiber endcap to add to the looks and desirability. It delivers an enriched sound for enhanced enjoyment. Meeting EC/ECE type approval this exhaust is an easy upgrade designed to improve the bike's performance. Carbon heatshield is not included.
Give your Kawasaki bike a more sporty look and sound with this Akrapovič slip-on exhaust. The lightweight titanium slip-on muffler features a laser marked logo, carbon end cap and carbon heat shield. This exhaust with catalyst is homologated and has ECE type-approval (Euro 5+). Suited for Z H2 Models from on Model Year 2023.
Enhance your ride with the Arrow matt black slip-on exhaust, specifically engineered for the Kawasaki Ninja 125 and Z125. Constructed from high-quality stainless steel and finished with a sleek carbon fiber end cap, this exhaust offers a lightweight design and a deep, sporty sound.
Fully compliant with Euro 5 emissions standards, the exhaust system is homologated (WVTA) and ECE-type approved in collaboration with Kawasaki Motors Europe and Arrow Special Parts. A carbon fiber heat shield is included for added protection and a refined aesthetic.
Give your Kawasaki bike a more sporty look and sound with this Akrapovič slip-on exhaust. The lightweight titanium slip-on muffler features a laser marked logo, carbon end cap and carbon heat shield. This exhaust with catalyst is homologated and has ECE type-approval (Euro 5+).
Arrow full exhaust system with catalyst and stainless steel muffler.
This system is lighter compared to the stock exhaust system and gives a pure sporty sound.
With carbon fibre end cap and heat shield. Laser marked logo.
This homologated (Euro 5+) exhaust system is compliant with EU regulations and has ECE type-approval.
Please note:
Arrow full exhaust system with catalyst and stainless steel muffler. This system is lighter compared to the stock exhaust system and gives a pure sporty sound.
With carbon fibre end cap and heat shield. Laser marked logo.
This homologated (Euro 5+) exhaust system is compliant with EU regulations and has ECE type-approval.
(Exhaust can not be combined with accessory panniers)
(Exhaust can not be combined with 35kW power conversion)
Please note:
Not for 2023 modelyear Z650 where the VIN number starts with ML5ER650N...) (single oxygen sensor)
Not for 2023 modelyear Ninja 650 where the VIN number starts with ML5EX650P...) (single oxygen sensor)
Akrapovič full exhaust system with catalyst and titanium muffler. This system is around 2kg lighter compared to the stock exhaust system and gives a pure sporty sound. A combination of racing materials like titanium for the muffler outer sleeve and carbon fibre end cap give this exhaust system a racing touch. Laser marked logo. This homologated exhaust system is compliant with EU regulations and has EC/ECE type-approval. (Homologated for Euro-5+ bikes with front and rear oxygen sensor). Suitable for Model Years form on 2024.
Arrow matt black slip-on exhaust with carbon heat shield and carbon endcap. This system is lighter compared to the stock exhaust system and gives a deep sporty sound. This exhaust system is homologated according to EU regulations (emissions and noise) and has ECE type-approval. (Euro 5+)
Give your Kawasaki bike a more sporty look and sound with this Akrapovič slip-on system. This lightweight slip-on system offers great performance. The combination of racing materials like titanium for the muffler outer sleeve and carbon fiber end cap give this exhaust system a racing touch. The heatshield is included.
This homologated exhaust system is compliant with Euro5+ regulations (emissions and noise) and has EC type-approval.
Give your Kawasaki bike a more sporty look and sound with this Akrapovič slip-on exhaust. The lightweight titanium slip-on muffler features a laser marked logo, carbon end cap and carbon heat shield. This exhaust with catalyst is homologated and has ECE type-approval (Euro 5+). Suited for Z H2 Models from on Model Year 2023.
Arrow matt black exhaust system for Vulcan S. Full system made of stainless steel with catalyst and carbon endcap. This system is lighter compared to the stock exhaust system and gives a deep sporty sound.
The exhaust system is homologated according to EU regulations (emissions and noise) and has ECE type-approval. (Double oxygen sensor Euro5+)
Arrow matt black exhaust system for Vulcan S. Full system made of stainless steel with catalyst and carbon endcap. This system is lighter compared to the stock exhaust system and gives a deep sporty sound.
The exhaust system is homologated according to EU regulations (emissions and noise) and has ECE type-approval. (Double oxygen sensor Euro5+)
Give your Kawasaki bike a more sporty look and sound with this Akrapovič slip-on system. EC/ECE type approved and fully road legal. This lightweight system offers great performance. (Euro 5)
Give your Kawasaki bike a more hi-tech look and sporty sound with this Akrapovič slip-on system. This lightweight slip-on system offers great performance. The combination of racing materials like titanium for the muffler outer sleeve and carbon fibre end cap and heat shield give this exhaust system a racing touch.
This homologated exhaust system is compliant with EU regulations (emissions and noise) and has EC and ECE type-approval.
Give your Kawasaki a more sporty look with the hexagonal shaped Titanium Akrapovič muffler.
This lightweight slip-on is designed to be used together with our pannier system.
Consists of a stainless steel link pipe, stainless steel inlet/ titanium muffler outer sleeve, carbon fiber end cap, Carbon fiber muffler clamp and dual Akrapovič and Ninja 1100SX branded laser etched logo.
Carbon fiber heatshield set and fitting kit included.
Complies with the applicable European standards.
Give your Kawasaki Ninja 1100SX/SE a more sporty look with the hexagonal shaped Carbon Akrapovič muffler. This lightweight slip-on is designed to be used together with our pannier system. Consists of a stainless steel inlet, carbon fiber muffler outer sleeve, carbon fiber end cap, Carbon fiber muffler clamp and a Co-branded Akrapovič heat resistant sticker. Carbon fiber heatshield set and fitting kit included. Complies with the applicable European standards.
The Slip-On Line represents the first step in exhaust tuning and gives a performance increase to the Z900. It has a smaller, shorter, conical design, all aimed at improving the bike’s appearance.
It is manufactured from high-grade lightweight titanium, offering a big weight savings over the stock muffler, and is finished with a hand-built carbon-fibre endcap to add to the looks and desirability. It delivers an enriched sound for enhanced enjoyment.
Meeting EC/ECE type approval this exhaust is an easy upgrade designed to improve the bike’s performance.
Carbon heatshield is sold separately. Fits the new 2025 Z900.
Give your Kawasaki bike sporty look and sound with this Remus slip-on system. This slip-on system offers great performance and allows big lean angle. The combination of stainless steel for the muffler and mesh endcap give this exhaust system a racing touch. The heatshield is included. Remus exhaust is 800 gram lighter than original. This homologated exhaust system is compliant with Euro5+ regulations (emissions and noise) and has ECE type-approval. Exhaust is available with end trim-ring around the mesh in green or silver.
Give your Kawasaki Ninja ZX-6R a more sporty look with the Carbon Akrapovič slip-on muffler. Complies with the applicable European standards.
Akrapovič Black Titanium Slip-On Exhaust
A combination of lightweight racing materials like titanium for the muffler outer sleeve and carbon fiber end cap give this exhaust system a racing touch and powerful sound.
This homologated exhaust system is compliant with Euro5+ regulations (emissions and noise) and has EC/ECE type-approval.
Give your Kawasaki a more sporty look with the hexagonal-shaped carbon Akrapovič muffler.
Consists of a stainless steel inlet, carbon fibre muffler outer sleeve and end cap, carbon fibre muffler clamp, and a "co-branded Akrapovič Designed for Z1100” logo. Carbon fibre heatshield set and fitting kit included.
Complies with the applicable European Standards.
Give your Kawasaki bike a more sporty look and sound with this lightweight Akrapovič slip-on system.
New design titanium Akrapovič muffler developed for KLE with a special profiled surface to add durability and give a sporty look.
Similar to rally-raid bikes, the exhaust is upswept and mounted high to protect it on rougher roads.
Exhaust has carbon heat shield and titanium end cap. The exhaust system delivers a deep and powerful sound.
This homologated exhaust is compliant with Euro5+ regulations (emissions and noise) and has EC and ECE type-approval.
Can not be combined with KLE500 2x21L Genuine Accessory panniers
Enhance your ride with the Arrow matt black slip-on exhaust, specifically engineered for the Kawasaki Ninja 125 and Z125. Constructed from high-quality stainless steel and finished with a sleek carbon fiber end cap, this exhaust offers a lightweight design and a deep, sporty sound.
Fully compliant with Euro 5+ emissions standards, the exhaust system is homologated (WVTA) and ECE-type approved in collaboration with Kawasaki Motors Europe and Arrow Special Parts. A carbon fiber heat shield is included for added protection and a refined aesthetic.
Give your Ninja ZX-10R/RR a more sporty look and sound with this Akrapovič slip-on system. EC/ECE Euro-5+ homologated and fully road legal. This lightweight system offers great performance and resembles the exhaust used on the WSBK Ninja ZX-10R.
Give your Kawasaki Ninja ZX-6R a more sporty look with the Carbon Akrapovič slip-on muffler. Complies with the applicable European standards.
Give your Kawasaki Ninja 1000SX a more sporty look with the hexagonal shaped Carbon Akrapovič muffler. This lightweight slip-on is designed to be used together with our pannier system. Consists of a stainless steel inlet, carbon fiber muffler outer sleeve, carbon fiber end cap, Carbon fiber muffler clamp and a Co-branded Akrapovič heat resistant sticker. Carbon fiber heatshield set and fitting kit included. Complies with the applicable European standards.
The Slip-On Line represents the first step in exhaust tuning and gives a performance increase to the Z900. It has a smaller, shorter, conical design, all aimed at improving the bike’s appearance.
It is manufactured from high-grade lightweight titanium, offering a big weight savings over the stock muffler, and is finished with a hand-built carbon-fibre endcap to add to the looks and desirability. It delivers an enriched sound for enhanced enjoyment.
Meeting EC/ECE type approval this exhaust is an easy upgrade designed to improve the bike’s performance.
Carbon heatshield is sold separately.
This beautifully designed exhaust has a more compact shape to fit with the bike's naked and sporty appearance. It is constructed using hand-crafted carbon fiber parts and finished with an end-cap in the same perfectly finished race-proven material. Power and torque increases throughout the range and a weight savings over the stock system all add to improved performance. It serves up an enriched tone for added aural enjoyment and is EC/ECE type approved. Carbon heat shield not included.
Akrapovič Carbon Heat Shield Suited for the 2017-2024 Model Year Z900 models.
Give your Kawasaki bike a more sporty look and sound with this Akrapovič slip-on system. EC/ECE type approved and fully road legal. This lightweight system offers great performance and resembles the exhaust used on the WSBK Ninja ZX-10RR.
Evolution line complete system with titanium headers and carbon hexagonal muffler. This system provides a significant increase of both power and torque, across the whole RPM band, accompanied by great weight reduction as well.
Includes carbon bracket to replace original aluminium footrest mounting.
Should only be used in combination with fuel injection tuning to prevent engine damage and achieve maximum performance.
(Not for street use)
The Slip-On Line represents the first step in exhaust tuning and gives a performance increase to the Z900. It has a smaller, shorter, conical design, all aimed at improving the bike’s appearance. It is manufactured from high-grade lightweight titanium, offering a big weight savings over the stock muffler, and is finished with a hand-built carbon-fibre endcap to add to the looks and desirability. It delivers an enriched sound for enhanced enjoyment. Meeting EC/ECE type approval this exhaust is an easy upgrade designed to improve the bike’s performance. Carbon heatshield is not included.
Akrapovič full exhaust system with catalyst and titanium muffler. This system is around 2kg lighter compared to the stock exhaust system and gives a pure sporty sound. A combination of racing materials like titanium for the muffler outer sleeve and carbon fibre end cap give this exhaust system a racing touch. Laser marked logo. This homologated exhaust system is compliant with EU regulations and has EC/ECE (Euro 5) type-approval (Euro 5). Suitable for Model Year 2020 up to 2023.
Arrow matt black exhaust system for Vulcan S. Full system made of stainless steel with catalyst and carbon endcap. This system is lighter compared to the stock exhaust system and gives a deep sporty sound. This exhaust system is homologated according to EU regulations (emissions and noise) and has ECE type-approval. (Euro 5)
Deco stripe set for 28L panniers. Available in almost all factory standard colours.
Top Case (47L) Bracket for the Ninja 1000SX.
Not compatible with Pannier (2 x 28L) Set.
Quick release 56L pannier set that will hold most full-face helmets. Panniers designed to attached to handgrips and footrest and give a clean sporty look when removed. Narrow mounting width of 93cm and suitable for high speed
cruising.
Set requires:
Semi rigid Polyester tank bag specially designed for the fuel tank shape.
The Lock Cylinder Set utilizes the ignition key to create a One Key System for both the panniers and the vehicle.
Zippered black nylon liners make it easy to pack your cargo and drop into the locking panniers.
Once you’ve arrived at your destination, just grab your pannier inner bags so you can leave the panniers on your motorcycle and get going.
Semi soft Nylon saddlebag set with reflective piping and Kawasaki logo.
Semi rigid Nylon tank bag specially designed for the fuel tank shape.
Black/Grey tank bag with reflective piping and Kawasaki logo.
Pocket with transparent plastic window at top of tank bag with hole for earphone.
Inside has partitions to prevent goods moving around.
Including shoulder belt and rain cover with transparent window.
L350mm, W223mm,H150mm
Load Weight Max 2kg
Load Capacity approximate 4 Litre.
A matching bracket is required for fitment.
Keep your personal items in 47 liters of lockable, waterproof storage; enough room for two full-face helmets. Requires Base Plate and model specific accessories.
One-Key System to conveniently open the top case using your (inner groove) ignition key.
Top Case (47L) Base Plate for all Versys 1000 models.
Purchase the this base plate as a required component to install the 47L Top Case.
Rigid, water-resistant bag with compartments makes it easy to pack your cargo and drop into the locking Top Case. Once you have arrived at your destination, just grab your packed Inner Bag so you can leave the Top Case on your motorcycle and get going.
One-key system for the 47L top case, enabling you conveniently open the top case using your ignition key.
Keep your personal items secure on the road with saddlebags that complement the overall look of your bike. This black leather saddlebag set has reinforcements to keep the shape in all riding conditions. Durable water-resistant marine grade vinyl with genuine cow leather trim. An interior pocket keeps important papers and documents separate and protected. A magnetic clasp closure on the lid makes accessing your goods convenient. (Load 2.2kg per bag , Inner dimensions: L=33, H=26, D=13cm) Requires (KQR™) bracket kit and saddlebag supports (sold separately)
Purchase the Saddlebag Support Set as a required component to mount the Saddlebag Set or Soft Saddlebag Set, sold separately.
Top Case 47 L Kit for the 2025 Versys 1100 S/SE
Top Case providing a spacious 47 litres of storage space. Will fit two of most full face helmets.
Includes our One-Key System: your bike’s ignition key also locks and unlocks the Top Case.
Composed to match the 2025 Model Year Versys 1100 S & SE colour schemes.
This Top Case Kit includes:
Top Case 47 L Kit for the 2026 Versys 1100 S/SE
Top Case providing a spacious 47 litres of storage space. Will fit two of most full face helmets.
Includes our One-Key System: your bike’s ignition key also locks and unlocks the Top Case.
Composed to match the 2026 Model Year Versys 1100 S & SE colour schemes.
This Top Case Kit includes:
Top Case 56 L Kit for the 2026 Ninja 1100SX SE
Top Case providing a spacious 47 litres of storage space. Will fit two of most full face helmets.
Includes our One-Key System: your bike’s ignition key also locks and unlocks the Top Case.
Composed to match the 2026 Model Year Ninja 1100SX SE colour schemes.
This Top Case Kit includes:
Quick-release 56 L Pannier Kit for the 2025 Versys 1100
Designed to hold most full-face helmets, the panniers mount directly to the factory handgrips and provide a clean, integrated look when removed.
Includes our One-Key System: your bike’s ignition key also locks and unlocks the panniers.
Composed to match the 2025 Model Year Versys 1100 colour scheme.
This Pannier Kit includes:
Quick-release 56 L Pannier Kit for the 2025 Versys 1100 S & SE
Designed to hold most full-face helmets, the panniers mount directly to the factory handgrips and provide a clean, integrated look when removed.
Includes our One-Key System: your bike’s ignition key also locks and unlocks the panniers.
Composed to match the 2025 Model Year Versys 1100 S & SE colour schemes.
This Pannier Kit includes:
Quick-release 56 L Pannier Kit for the 2026 Versys 1100 S/SE
Designed to hold most full-face helmets, the panniers mount directly to the factory handgrips and provide a clean, integrated look when removed.
Includes our One-Key System: your bike’s ignition key also locks and unlocks the panniers.
Composed to match the 2026 Model Year Versys 1100 S/SE colour schemes.
This Pannier Kit includes:
Quick-release 56 L Pannier Kit for the 2026 Ninja 1100SX SE
Designed to hold most full-face helmets, the panniers mount directly to the factory handgrips and provide a clean, integrated look when removed.
Includes our One-Key System: your bike’s ignition key also locks and unlocks the panniers.
Composed to match the 2026 Model Year Ninja 1100SX SE colour schemes.
This Pannier Kit includes:
Black steel construction luggage rack mounts to the rear frame.
Chrome plated steel construction luggage rack mounts to the rear frame.
Black steel construction luggage rack mounts to the rear frame.
The Top Case (30 L) offers enhanced carrying capacity, while maintaining the bike’s slim figure to facilitate navigating city traffic.
Rigid, steel bracket with black powder-coating. Topcase cover to match motorcycle colour.
Top Case has it's own lock and key. Baseplate is included.
For optimal passenger riding comfort. Features a faux leather stitched cover with a quality feel.
Keep your personal items secure on the road with saddlebags that complement the overall look of your bike.
This black leather saddlebag set has reinforcements to keep the shape in all riding conditions.
Quick release system inside the bag allows bags to be removed from the support easily without tools.
Durable water-resistant marine grade vinyl with genuine leather trim. An interior pocket keeps important papers and documents separate and protected.
A magnetic clasp closure on the lid makes accessing your goods convenient.
KQR mounting system allows for easy installation of KQR Saddlebags once installed.
Load 2.2kg per bag , Inner dimensions: H26 x L33 x D 13cm
The KQR Saddlebag Kit consists of 3 components:
Keep your personal items secure on the road with saddlebags that complement the overall look of your bike.
This black leather saddlebag set has reinforcements to keep the shape in all riding conditions.
Durable water-resistant marine grade vinyl with genuine leather trim. An interior pocket keeps important papers and documents separate and protected.
A magnetic clasp closure on the lid makes accessing your goods convenient.
(Load 2.2kg per bag , Inner dimensions: H26 x L33 x D 13cm)
The Fixed Saddlebag Kit consists of 2 components:
Durable black powder coated steel luggage rack mounts to your fixed passenger backrest.
Designed by Kawasaki to enhance your Vulcan S motorcycle styling while providing extra space for whatever you take with you on the road.
All required brackets and hardware included.
20cm (8") long and 23cm (9") wide.
The Passenger Luggage Rack installation requires 2 components:
Top Case 56 L Kit for the 2026 Versys 650
Top Case providing a spacious 47 litres of storage space. Will fit two of most full face helmets. Bracket has lateral movement damping mechanism for improved reliablity.
Includes our One-Key System: your bike’s ignition key also locks and unlocks the Top Case.
Composed to match the 2026 Model Year Versys 650 colour schemes.
This Top Case Kit includes:
Optional accessories:
Top Case 56 L Kit for the 2025 Versys 650
Top Case providing a spacious 47 litres of storage space. Will fit two of most full face helmets. Bracket has lateral movement damping mechanism for improved reliablity.
Includes our One-Key System: your bike’s ignition key also locks and unlocks the Top Case.
Composed to match the 2025 Model Year Versys 650 colour schemes.
This Top Case Kit includes:
Optional accessories:
Top Case 47 L Kit for the 2025 Versys 1100
Top Case providing a spacious 47 litres of storage space. Will fit two of most full face helmets.
Includes our One-Key System: your bike’s ignition key also locks and unlocks the Top Case.
Composed to match the 2025 Model Year Versys 1100 colour scheme.
This Top Case Kit includes:
Top Case 47 L Kit for the 2026 Versys 1100
Top Case providing a spacious 47 litres of storage space. Will fit two of most full face helmets.
Includes our One-Key System: your bike’s ignition key also locks and unlocks the Top Case.
Composed to match the 2026 Model Year Versys 1100 colour scheme.
This Top Case Kit includes:
Top Case 56 L Kit for the 2025 Ninja 1100SX
Top Case providing a spacious 47 litres of storage space. Will fit two of most full face helmets.
Includes our One-Key System: your bike’s ignition key also locks and unlocks the Top Case.
Composed to match the 2025 Model Year Ninja 1100SX colour scheme.
This Top Case Kit consists of:
Top Case 56 L Kit for the 2025 Ninja 1100SX SE
Top Case providing a spacious 47 litres of storage space. Will fit two of most full face helmets.
Includes our One-Key System: your bike’s ignition key also locks and unlocks the Top Case.
Composed to match the 2025 Model Year Ninja 1100SX SE colour schemes.
This Top Case Kit consists of:
Quick-release 56 L Pannier Kit for the 2026 Versys 650
Designed to hold most full-face helmets, the panniers mount directly to the factory handgrips and provide a clean, integrated look when removed.
Includes our One-Key System: your bike’s ignition key also locks and unlocks the panniers.
Composed to match the 2026 Model Year Versys 650 colour schemes.
This Pannier Kit includes:
Quick-release 56 L Pannier Kit for the 2025 Versys 650
Designed to hold most full-face helmets, the panniers mount directly to the factory handgrips and provide a clean, integrated look when removed.
Includes our One-Key System: your bike’s ignition key also locks and unlocks the panniers.
Composed to match the 2025 Model Year Versys 650 colour schemes.
This Pannier Kit includes:
Quick-release 56 L Pannier Kit for the 2026 Versys 1100
Designed to hold most full-face helmets, the panniers mount directly to the factory handgrips and provide a clean, integrated look when removed.
Includes our One-Key System: your bike’s ignition key also locks and unlocks the panniers.
Composed to match the 2026 Model Year Versys 1100 colour scheme.
This Pannier Kit includes:
Quick-release 56 L Pannier Kit for the 2026 Ninja H2 SX.
Designed to hold most full-face helmets, the panniers mount directly to the factory handgrips and provide a clean, integrated look when removed.
Includes our One-Key System: your bike’s ignition key also locks and unlocks the panniers.
Composed to match the 2026 Model Year Ninja H2 SX colour scheme.
This Pannier Kit includes:
Quick-release 56 L Pannier Kit for the 2025 Ninja H2 SX.
Designed to hold most full-face helmets, the panniers mount directly to the factory handgrips and provide a clean, integrated look when removed.
Includes our One-Key System: your bike’s ignition key also locks and unlocks the panniers.
Composed to match the 2025 Model Year Ninja H2 SX colour scheme.
This Pannier Kit includes:
Quick-release 56 L Pannier Kit for the 2025 Ninja H2 SX SE.
Designed to hold most full-face helmets, the panniers mount directly to the factory handgrips and provide a clean, integrated look when removed.
Includes our One-Key System: your bike’s ignition key also locks and unlocks the panniers.
Composed to match the 2025 Model Year Ninja H2 SX SE colour scheme.
This Pannier Kit includes:
Optional accessories:
Quick-release 56 L Pannier Kit for the 2025 Ninja 1100SX.
Designed to hold most full-face helmets, the panniers mount directly to the factory handgrips and provide a clean, integrated look when removed.
Includes our One-Key System: your bike’s ignition key also locks and unlocks the panniers.
Composed to match the 2025 Model Year Ninja 1100SX colour scheme.
This Pannier Kit includes:
Quick-release 56 L Pannier Kit for the 2026 Ninja 1100SX.
Designed to hold most full-face helmets, the panniers mount directly to the factory handgrips and provide a clean, integrated look when removed.
Includes our One-Key System: your bike’s ignition key also locks and unlocks the panniers.
Composed to match the 2026 Model Year Ninja 1100SX colour scheme.
This Pannier Kit includes:
Quick-release 56 L Pannier Kit for the 2025 Ninja 1100SX SE
Designed to hold most full-face helmets, the panniers mount directly to the factory handgrips and provide a clean, integrated look when removed.
Includes our One-Key System: your bike’s ignition key also locks and unlocks the panniers.
Composed to match the 2025 Model Year Ninja 1100SX SE colour schemes.
This Pannier Kit includes:
Secure your personal items in 2 x 21 litres of lockable storage
18-21L Rear Bag. Replaces the passenger seat.
Rugged, water-resistant nylon construction with reinforced foam body and lid.
Replaces rear seat and mounts to rear fender side bolts using custom quad side straps and steel center bracket with non-scratch rubberized coating to help protect paint finish
Expandable feature adds 7cm of vertical storage capacity (18-21 liters). Reflective piping for night visibility. Logo on lid.
L=45, W=25, H=20-28cm
Note: Do not use on satin, semi-gloss, or flat finish bodywork surfaces
Deco stripe set for 28L panniers. Available in almost all factory standard colours.
Keep your personal items secure on the road with saddlebags that complement the overall look of your bike. This black leather saddlebag set has reinforcements to keep the shape in all riding conditions. Durable water-resistant marine grade vinyl with genuine cow leather trim. An interior pocket keeps important papers and documents separate and protected. A magnetic clasp closure on the lid makes accessing your goods convenient. (Load 2.2kg per bag , Inner dimensions: L=33, H=26, D=13cm) Requires (KQR™) bracket kit and saddlebag supports (sold separately)
Tank Bag Bracket for the Ninja/Z650 to mount the 999940803 - Tank Bag (4 L) with Window
Top Case (47L) Bracket for the Ninja 1000SX.
Not compatible with Pannier (2 x 28L) Set.
Quick release 56L pannier set that will hold most full-face helmets. Panniers designed to attached to handgrips and footrest and give a clean sporty look when removed. Narrow mounting width of 93cm and suitable for high speed
cruising.
Set requires:
Tank Bag Bracket for Z900 / Z900 (70kW) / Z900 SE to mount the 999940803 - Tank Bag (4L) with Window
Tank Bag Bracket for the Ninja/Z400 & Ninja/Z4500 to mount the 999940803 - Tank Bag (4L) with Window
Tank Bag Bracket for Z H2 / Z H2 SE to mount the 999940803 - Tank Bag (4L) with Window
Semi rigid Polyester tank bag specially designed for the fuel tank shape.
One-Key System to conveniently open the top case using your (inner groove) ignition key.
Rugged, water-resistant nylon tank bag with reinforced foam body and lid to hold shape even when empty.
Expandable feature adds 7cm of storage capacity.
Clear window tray (13x10x4cm) for transponder, coins, etc. Dual outlet ports.
Reflective piping, front hook, magnetic skirt and rear strap. Non-scratch rubberized coating to protect paint finish.
Power/drink tube port at top of bag for direct access to electronic devices, hydration systems, etc. Including rain cover.
Volume 18-20L
L=43 W=28 H=15-22cm
Do not use on semi-gloss or matt/flat finish fuel tank surfaces
The Lock Cylinder Set utilizes the ignition key to create a One Key System for both the panniers and the vehicle.
Zippered black nylon liners make it easy to pack your cargo and drop into the locking panniers.
Once you’ve arrived at your destination, just grab your pannier inner bags so you can leave the panniers on your motorcycle and get going.
Semi soft Nylon saddlebag set with reflective piping and Kawasaki logo.
Semi rigid Nylon tank bag specially designed for the fuel tank shape.
Black/Grey tank bag with reflective piping and Kawasaki logo.
Pocket with transparent plastic window at top of tank bag with hole for earphone.
Inside has partitions to prevent goods moving around.
Including shoulder belt and rain cover with transparent window.
L350mm, W223mm,H150mm
Load Weight Max 2kg
Load Capacity approximate 4 Litre.
A matching bracket is required for fitment.
The Top Case (30 L) offers enhanced carrying capacity, while maintaining the bike’s slim figure to facilitate navigating city traffic.
Rigid, steel bracket with black powder-coating. Topcase cover to match motorcycle colour.
Top Case has it's own lock and key. Baseplate is included.
Keep your personal items in 47 liters of lockable, waterproof storage; enough room for two full-face helmets. Requires Base Plate and model specific accessories.
For optimal passenger riding comfort. Features a faux leather stitched cover with a quality feel.
Top Case (47L) Base Plate for all Versys 1000 models.
Purchase the this base plate as a required component to install the 47L Top Case.
Rigid, water-resistant bag with compartments makes it easy to pack your cargo and drop into the locking Top Case. Once you have arrived at your destination, just grab your packed Inner Bag so you can leave the Top Case on your motorcycle and get going.
One-key system for the 47L top case, enabling you conveniently open the top case using your ignition key.
Zippered black nylon liners make it easy to pack your cargo and drop into the locking panniers.
Once you’ve arrived at your destination, just grab your pannier inner bags so you can leave the panniers on your motorcycle and get going.
The Pannier Lock Cylinder set is the key to your user convenience, because by this, you can open your panniers with the same key as you would start your motorcycle.
Rigid, water-resistant bag with compartments makes it easy to pack your cargo and drop into the locking Top Case. Once you have arrived at your destination, just grab your packed Inner Bag so you can leave the Top Case on your motorcycle and get going.
Durable powder coated steel luggage rack that replaces the passenger seat.
Designed to enhance usability and styling. Securely mount this luggage rack to your rear fender for extra cargo capacity. Developed by Kawasaki to integrate with the clean, modern lines of your Vulcan S
Length = 35cm, width = 20cm. Anthracite/Black or Chrome finish.
Important Notes: Not suitable for passenger seating.
Ninja 650 / Z650 Top Case Kit
Durable ABS Construction 30 Liter Top Case.
Offers enhanced carrying capacity, while maintaining the bike’s slim figure to facilitate navigating city traffic.
Rigid, steel bracket with black powder-coating. Top Case cover to match motorcycle colour. Top Case has it's own lock and key. Baseplate is included.
Partnumbers required:
Backrest pad adds passenger comfort with an integrated design that quickly and easily attaches to the 30 Liter Top Case.
Purchase the Saddlebag Support Set as a required component to mount the Saddlebag Set or Soft Saddlebag Set, sold separately.
Black steel construction luggage rack mounts to the rear frame.
Chrome plated steel construction luggage rack mounts to the rear frame.
Versys 650 One-Key System KQR Top Case Kit
Durable ABS Construction 40 Liter Top Case.
Case can be locked with bike key and has quick-release base.
Approx. 40 liter capacity (fits one full face helmet size large)
Requires 4 parts for Versys 650 from on MY22:
Black steel construction luggage rack mounts to the rear frame.
Chrome plated steel construction luggage rack mounts to the rear frame.
Durable tubular steel silver finish construction with strong center plate mounts to the rear chassis.
Provides ± 9kg cargo capacity and can fit Top Case.
.
Plate (± 25x25cm) includes four slots for attaching straps or hooks to secure luggage roll.
Tie hook and mushroom provides fixing points set to help strap down luggage.
Rear Carrier with 42 L Top Case Kit for the KLE500 & KLE500 SE
Secure your personal items in 42 litres of lockable storage.
Includes our One-Key System: Your bike’s ignition key also locks and unlocks the Top Case.
The Kawasaki Top Case can be combined with the Kawasaki Panniers, giving you many options for touring setups.
This Kit includes:
Rear Carrier with 42 L Pannier Kit for the KLE500 & KLE500 SE
Secure your personal items in 2 x 21 litres of lockable storage.
Includes our One-Key System: Your bike’s ignition key also locks and unlocks the panniers.
The Kawasaki Panniers can be combined with the Kawasaki 42 L Top Case, giving you many options for touring setups.
This Pannier Kit includes:
42 L Pannier Kit for the KLE500 & KLE500 SE
Secure your personal items in 2 x 21 litres of lockable storage.
Includes our One-Key System: Your bike’s ignition key also locks and unlocks the panniers.
The Kawasaki Panniers can be combined with the Kawasaki 42 L Top Case, giving you many options for touring setups.
This Pannier Kit includes:
Developed to fit perfectly under the seat. Made from hardened steel with special security locking mechanism. European manufacture.
SRA + ART 4**** approved.
Inner dimensions: 10 x 27 cm.
Developed to fit perfectly under the seat. Made from hardened steel with special security locking mechanism. European manufacture.
SRA + ART 4**** approved.
Inner dimensions: 10 x 21 cm.
For the 10x21cm U-Lock. Fits under the seat of your Ninja 650 / Z650.
Conveniently lock your helmet when you’re off the road.
Conveniently lock your helmet when you’re off the road.
Conveniently lock your helmet when you’re off the road.
Conveniently lock your helmet when you’re off the road.
Lock your helmet securely and conveniently when you’re off the road
U-Lock 10x21cm from hardened steel with special security locking mechanism. Fits under the seat of your Z650/Ninja 650 with optional bracket. SRA approved.
Genuine Kawasaki chain kit containing engine Sprocket, washer, rear sprocket, nuts and cotter pin etc.
This complete package from Kawasaki contains all the qualified genuine parts required for correct drive chain replacement for popular models.
Compared to aftermarket kits, the genuine kits have the advantage of a rubber coated front sprocket, that will make the chain operation much more quiet. Somebody who has been running an aftermarket kit will know this difference.
The new chain kits have the recognizable green Kawasaki branded packaging.
Two classic white "KAWASAKI" emblems as a replacement for the standard Kawasaki emblems.
Replacement emblems are not suitable for the Metallic Matte Covert Green Z900RS version.
Add a custom look to your Z900 RS motorcycle with this KYB Fork Cap Set.
Chrome plated steel Throttle Body Covers.
Sold per side separately.
All required mounting hardware included
Chrome plated steel tail light bracket.
Two classic white "KAWASAKI" emblems as a replacement for the standard Kawasaki emblems.
Stylish seat cover to enhance the sporting appearance of the bike. Includes rubber pad. Available in almost all factory standard colours. Replaces the passenger seat of the Ninja 500 & Z500.
Give your motorcycle a custom appearance with this unique lower cowling for the Z400.
Marchesini lightweight front wheel kit.
Contains:
Stylish seat cover to enhance the sporting appearance of the bike. Includes rubber pad. Available in almost all factory standard colours. Replaces the passenger seat of the Ninja 125 and Z125
Stylish seat cover to enhance the sporting appearance of the bike. Includes rubber pad. Available in almost all factory standard colours. Replaces the passenger seat of the Ninja 650 & Z650.
Stylish seat cover to enhance the sporting appearance of the bike. Available in almost all factory standard colours. Replaces the passenger seat of the Ninja 1000SX
Stylish seat cover to enhance the sporting appearance of the bike. Includes rubber pad. Available in almost all factory standard colours. Replaces the passenger seat of the Ninja 400, Z400, Ninja e-1 and Z e-1.
Stylish seat cover to enhance the sporting appearance of the bike. Includes rubber pad. Available in almost all factory standard colours. Replaces the passenger seat of the Z900.
Fits the 2020-2024 Z900.
Stylish seat cover to enhance the sporting appearance of the bike. Includes rubber pad. Available in almost all factory standard colours. Replaces the passenger seat.
Stylish seat cover to enhance the sporting appearance of the bike. Includes rubber pad. Available in almost all factory standard colours. Replaces the passenger seat of the Z H2.
Stylish seat cover to enhance the sporting appearance of the bike. Includes rubber pad. Available in almost all factory standard colours. Replaces the passenger seat of the Ninja ZX-10R.
Stylish seat cover to enhance the sporting appearance of the bike. Includes rubber pad. Available in almost all factory standard colours. Replaces the passenger seat of the Ninja ZX-4R.
Whether you want to park your bike in a pitbox or in your garage, let your precious machine rest in style on this Kawasaki Garage Mat. The mat meets new FIM environmental codes and offers a high level of absorption and dust-control features.
Centre stand specially for Z900RS.
Bike cover made from breathable heavy-duty non-woven ripstop material. Kawasaki specific with green honeycomb design elements Easy reach lock buckle. 100% Polyester. With multi usable storage bag.
Bike cover made from breathable heavy-duty non-woven ripstop material. Kawasaki specific with green honeycomb design elements Easy reach lock buckle. 100% Polyester. With multi usable storage bag.
Made from strong Anti-tear Honeycomb ripstop fabric. Heat resistance till 120 degrees Celsius. Subtle branding.
100% Polyester. With multi usable (back)packing string bag.
Made from strong Anti-tear Honeycomb ripstop fabric. Heat resistance till 120 degrees Celsius. Subtle branding.
100% Polyester. With multi usable (back)packing string bag.
(XL + top case cover has extra compartment that can be zipped open to make room for top case)
Made from strong Anti-tear Honeycomb ripstop fabric. Heat resistance till 120 degrees Celsius. Subtle branding.
100% Polyester. With multi usable (back)packing string bag.
Made from strong Anti-tear Honeycomb ripstop fabric. Heat resistance till 120 degrees Celsius. Subtle branding.
100% Polyester. With multi usable (back)packing string bag.
(XL + top case cover has extra compartment that can be zipped open to make room for top case)
Made from strong Anti-tear Honeycomb ripstop fabric. Heat resistance till 120 degrees Celsius. Subtle branding.
100% Polyester. With multi usable (back)packing string bag.
(XL + top case cover has extra compartment that can be zipped open to make room for top case)
Made from strong Anti-tear Honeycomb ripstop fabric. Heat resistance till 120 degrees Celcius. Subtle branding.
100% Polyester. With multi usable (back)packing string bag.
Fits:
Whether you want to park your bike in a pitbox or in your garage, let your precious machine rest in style on this Kawasaki Garage Mat. The mat meets new FIM environmental codes and offers a high level of absorption and dust-control features.
Centre stand specially for Z900RS.
Assists with maintenance and cleaning, this center stand mounts to your motorcycle.
Strong durable multi layered fabric with taped seams. Heat resistant honeycomb till 120 degrees Celcius. Subtle Branding.
100% Polyester. With multi usable packing backpack.
(XL + top case cover has extra compartment that can be zipped open to make room for top case)
Bike cover made from breathable heavy-duty non-woven ripstop material. Kawasaki specific with green honeycomb design elements Easy reach lock buckle. 100% Polyester. With multi usable storage bag.
4-Way super stretch material. Reinforced bottom. Available in Green-Black and Red-Black
En uundværlig værktøj for både motorcykelentusiaster og mekanikere. Designet til at give stabilitet og bekvemmelighed, tillader denne paddock-stand nem adgang til hjulene, affjedringen og andre komponenter.
Denne premium bagstøtte til cykler kan tages fra hinanden, hvilket gør transporten meget lettere. Den kompakte cykelstand leveres i en praktisk transporttaske med indbygget bærehåndtag. Standeren er lavet af førsteklasses stål og har en grøn og sort finish. Kawasaki-logoet er laserskåret i stål.
Valgfrit er gaflerne, der passer til dine præferencer;
Large clear windscreen for improved comfort and wind protection.
Purchase the Windscreen Fork Bracket as a required component to mount the Large or Medium Windscreen, or the Café Deflector, sold separately
Purchase the Fixed Windscreen Mounting Bracket as a required component to mount the Fixed Large or Medium Windscreen, sold separately.
Large Café Style Smoke Windscreen for enhanced wind protection.
Large smoke windscreen for better wind protection, more comfort and improved looks. This screen is approximately 15 mm higher and 40 mm wider then the original windscreen.
Kawasaki branded product, produced and developed by Kawasaki and fully road legal.
Large clear windscreen for better wind protection, more comfort and improved looks. This screen is approximately 15 mm higher and 40 mm wider then the original windscreen.
Kawasaki branded product, produced and developed by Kawasaki and fully road legal.
Clear meter cover raises airflow from the front cowl. About 5cm higher and 5cm wider with spoiler edge for improved wind protection and comfort.
Large clear windscreen, designed to provide additional rider comfort.
This screen is approximately 24 mm higher than the standard mounted windscreen.
Kawasaki branded product, developed by Kawasaki and fully road legal.
Standard shape double bubble smoke windshield for wind protection and improved looks. With Kawasaki logo and EU type approval.
Smoke windscreen in the same shape and size as original. With cutout for Auto High Beam sensor.
Large smoke windscreen for better wind protection, more comfort and improved looks. This screen is approximately 15 mm higher and 40 mm wider then the original windscreen.
Kawasaki branded product, produced and developed by Kawasaki and fully road legal.
Large clear windscreen for better wind protection, more comfort and improved looks. This screen is approximately 15 mm higher and 40 mm wider then the original windscreen.
Kawasaki branded product, produced and developed by Kawasaki and fully road legal.
Large smoke windscreen for better wind protection, more comfort and improved looks. This screen is approximately 15 mm higher and 40 mm wider then the original windscreen.
Kawasaki branded product, produced and developed by Kawasaki and fully road legal.
Large clear windscreen for better wind protection, more comfort and improved looks. This screen is approximately 15 mm higher and 40 mm wider then the original windscreen.
Kawasaki branded product, produced and developed by Kawasaki and fully road legal.
Special design large smoke windscreen for better wind protection and improved looks.
This screen is approximately 60mm higher and 70mm wider (35+35mm) than the original windshield for more comfort.
Special design large clear windscreen for better wind protection and improved looks.
This screen is approximately 60mm higher and 70mm wider (35+35mm) than the original windshield for more comfort.
Dark smoke meter cover for improved wind protection and a sporty look. ± 5cm wider and ± 5cm higher than original.
Large scratch-resistant smoke windscreen, designed to provide additional rider comfort and styling. Kawasaki branded product, developed by Kawasaki and fully road legal.
For mounting to the Versys 650, the windscreen bracket kit (999941689) is required.
Scratch-resistant clear windscreen, designed to provide additional rider comfort. This screen is approximately 90mm higher and 140mm wider than standard. Kawasaki branded product, produced and developed by Kawasaki and fully road legal.
Large scratch-resistant clear windscreen, designed to provide additional rider comfort and styling. Kawasaki branded product, developed by Kawasaki and fully road legal. For mounting to the Versys 650, the windscreen bracket kit (999941689) is required.
Larger Meter Cover raises airflow from the front cowl while maintaining an overall aggressive appearance.
Large smoke meter cover for improved protection and a sporty look. 10cm wider and 5cm higher than original.
Large scratch-resistant smoke windscreen, designed to provide additional rider comfort and styling. Kawasaki branded product, developed by Kawasaki and fully road legal. For mounting to the Versys 650, the windscreen bracket kit (999941689) is required.
This large touring windscreen gives improved wind protection and comfort. It is 9cm higher and 4cm wider than original windshield and has a spoiler edge to direct airflow upwards.
This tinted, race style smoke windscreen is designed to reduce wind pressure and improve aerodynamics. Homologated with bike type approval.
Part Number: 022CAT0020C– Hard Cabin with Heater for MULE PRO-DX.
Includes: Glass Windscreen, Plastic Roof, Polycarbonate Rear Panel, Polycarbonate Doors (side windows no longer included), Wiper and Washer Kit, and Heater Kit.
Structure made of high-grade steel with quality black finish. Flip-up tinted single-layer safety glass windscreen with rubber seals and locks.
The doors are equipped with hydraulic stoppers and automotive-style locks.
Modular Parts:
Image shown is 022CAT0020A– MULE PRO-DX Hard Cabin Kit with Doors with Sliding Windows.
Part Number: 022CAT0020D – Hard Cabin with Heater for MULE PRO-DX.
Includes: Glass Windscreen, Plastic Roof, Polycarbonate Rear Panel, Polycarbonate Doors (side windows no longer included), Wiper and Washer Kit, and Heater Kit.
Structure made of high-grade steel with quality black finish. Flip-up tinted single-layer safety glass windscreen with rubber seals and locks.
The doors are equipped with hydraulic stoppers and automotive-style locks.
Modular Parts:
Image shown is 022CAT0020A– MULE PRO-DX Hard Cabin Kit with Doors with Sliding Windows.
Part Number: 022CAT0021C– Hard Cabin for MULE PRO-DX.
Includes: Glass Windscreen, Plastic Roof, Polycarbonate Rear Panel, Polycarbonate Doors (side windows no longer included), and Wiper and Washer Kit.
Complete cabin for MULE PRO-DX. Perfect for those looking for maximum protection against rain, wind, and snow. Supplied without heating system, ideal for off-road vehicles in different climates.
Structure made of high-grade steel with quality black finish. Flip-up tinted single-layer safety glass windscreen with rubber seals and locks.
The doors are equipped with hydraulic stoppers and automotive-style locks.
Modular Parts:
Image shown is 022CAT0020A– MULE PRO-DX Hard Cabin Kit with Doors with Sliding Windows.
Hard Cabin complete kit for Mule PRO DX and FX
Includes:
Part Number: 022CAT0022B– Half Cabin Kit for MULE PRO-DX.
Includes: Glass Windscreen, Wiper and Washer Kit, Plastic Roof, and ABS with Polycarbonate (PC) Rear Panel.
Modular Parts:
Image shown is 022CAT0020A– MULE PRO-DX Hard Cabin Kit with Doors with Sliding Windows.
Part Number: 022CAT0022C – Half Cabin Kit for MULE PRO-DX.
Includes: Glass Windscreen, Wiper and Washer Kit, Plastic Roof, and ABS with Polycarbonate (PC) Rear Panel.
Modular Parts:
Image shown is 022CAT0020A– MULE PRO-DX Hard Cabin Kit with Doors with Sliding Windows.
Part Number: 022CAT0026A – Plastic Roof Panel for MULE PRO-DX.
Modular Parts:
Image shown is 022CAT0020A– MULE PRO-DX Hard Cabin Kit with Doors with Sliding Windows.
Rear panel for Kawasaki Mule DX that effectively protects against dust, mud, and rain. A robust solution for those who want to complete their cabin installation.
Part Number: 022CAT0027A– Rear Panel for MULE PRO-DX.
Available Modular Parts:
Image shown is 022CAT0020A– MULE PRO-DX Hard Cabin Kit with Doors with Sliding Windows.
Part Number: 022CAT0028 – Door Set.
Modular Parts:
Image shown is 022CAT0020A– MULE PRO-DX Hard Cabin Kit with Doors with Sliding Windows.
Part Number: 022CAT0040A : Hard Cabin complete kit for DXT.
Includes: Glass Windscreen + Wiper and Washer Kit + Steel Roof + Steel with Polycarbonate (PC) Rear Panel + PC Doors with Glass Fixed Windows + Heater Kit (Accessory Fuse Kit recommended)
Structure made of high grade steel with quality black finish. Flip-up tinted single layer safety glass windscreen with rubber seals and locks.
The doors are equipped with hydraulic stoppers, automotive style locks and sliding safety glass side windows.
Clear sliding window partition between front and rear seats allows complete cab enclosure whether in 2 or 4 passenger mode. Available in packages and as modular parts.
Modular Parts:
Image shown is 022CAT0040 Hard Cabin Kit for MULE PRO-DXT with Doors with Sliding Windows (Discontinued).
Part Number: 022CAT0040C : Hard Cabin complete kit for DXT.
Includes: Glass Windscreen + Wiper and Washer Kit + Steel Roof + Steel with Polycarbonate (PC) Rear Panel + PC Doors with Glass Fixed Windows + Heater Kit (Accessory Fuse Kit recommended)
Structure made of high grade steel with quality black finish. Flip-up tinted single layer safety glass windscreen with rubber seals and locks.
The doors are equipped with hydraulic stoppers, automotive style locks and sliding safety glass side windows.
Clear sliding window partition between front and rear seats allows complete cab enclosure whether in 2 or 4 passenger mode. Available in packages and as modular parts.
Modular Parts:
Image shown is 022CAT0040 Hard Cabin Kit for MULE PRO-DXT with Doors with Sliding Windows (Discontinued).
Part Number: 022CAT0042A: Half Cabin for MULE PRO-DXT.
Includes: Glass Windscreen + Wiper and Washer Kit+ Steel Roof + Steel with Polycarbonate (PC) Rear Panel
Modular Parts:
Image shown is 022CAT0040 Hard Cabin Kit for MULE PRO-DXT with Doors with Sliding Windows (Discontinued).
Part Number: 022CAT0042: Half Cabin for MULE PRO-DXT.
Includes: Glass Windscreen + Wiper and Washer Kit+ Steel Roof + Steel with Polycarbonate (PC) Rear Panel
Modular Parts:
Image shown is 022CAT0040 Hard Cabin Kit for MULE PRO-DXT with Doors with Sliding Windows (Discontinued).
Complete windscreen kit for Kawasaki Mule DX with windscreen wiper and washer system. Provides optimum visibility when driving in rain, snow, and dirty conditions.
Package:
022CAT0043A: Windscreen + Wiper + Washer
Modular Parts:
Image shown is 022CAT0020A– MULE PRO-DX Hard Cabin Kit with Doors with Sliding Windows.
Complete windscreen kit for Kawasaki Mule DX with windscreen wiper and washer system. Provides optimum visibility when driving in rain, snow, and dirty conditions.
Package:
022CAT0043A: Windscreen + Wiper + Washer
Modular Parts:
Image shown is 022CAT0020A– MULE PRO-DX Hard Cabin Kit with Doors with Sliding Windows.
Provides better visibility in rainy and dirty conditions. Designed specifically for use with the MULE SX Windscreen.
Available Modular Parts:
**Image shown is 022CAT0087A, MULE SX Hard Cabin with Sliding Windows.
Part Number: 022CAT0045 – Washer Set for MULE PRO-DX/DXT.
Modular Parts:
Image shown is 022CAT0020A– MULE PRO-DX Hard Cabin Kit with Doors with Sliding Windows.
Part Number: 42S05U01S30: Steel Roof Panel for MULE PRO-DXT.
Modular Parts:
Image shown is 022CAT0040 Hard Cabin Kit for MULE PRO-DXT with Doors with Sliding Windows (Discontinued).
Part Number: 022CAT0048A – Door Set (4 Pieces) for MULE PRO-DXT.
Modular Parts:
Image shown is 022CAT0040 Hard Cabin Kit for MULE PRO-DXT with Doors with Sliding Windows (Discontinued).
Part Number: 42S08U01S02 – Heater Assembly for MULE PRO-DX/DXT.
Modular Parts:
Part Number: 022CAT0087B – Hard Cabin Kit for MULE SX.
Includes: Glass Windscreen, Steel Roof, Steel with Polycarbonate (PC) Rear Panel, PC Doors with Fixed Glass Windows, and Wiper and Washer Kit.
Structure made of high-grade steel with quality black finish. The flip-up tinted single-layer safety glass windscreen features rubber seals and locks. Doors are equipped with hydraulic stoppers and automotive-style locks.
Modular Parts:
Image shown is 022CAT0087A – MULE SX Hard Cabin with Sliding Windows. 022CAT0087B has Fixed Windows.
Part Number: 022CAT0087C – Hard Cabin Kit for MULE SX.
Includes: Glass Windscreen, Steel Roof, Steel with Polycarbonate (PC) Rear Panel, PC Doors with Fixed Glass Windows, and Wiper and Washer Kit.
Structure made of high-grade steel with quality black finish. The flip-up tinted single-layer safety glass windscreen features rubber seals and locks. Doors are equipped with hydraulic stoppers and automotive-style locks.
Modular Parts:
Image shown is 022CAT0087A – MULE SX Hard Cabin with Sliding Windows. 022CAT0087C has Fixed Windows.
Part Number: 022CAT0088A – Half Cabin Kit for MULE SX.
Includes: Glass windscreen, Wiper and washer kit, Steel Roof Panel, Steel with Polycarbonate (PC) Rear Panel.
Modular Parts:
Image shown is 022CAT0087A, MULE SX Hard Cabin with Sliding Windows.
Part Number: 022CAT0088 – Half Cabin Kit for MULE SX.
Includes: Glass windscreen, Wiper and washer kit, Steel Roof Panel, Steel with Polycarbonate (PC) Rear Panel.
Modular Parts:
Image shown is 022CAT0087A, MULE SX Hard Cabin with Sliding Windows.
The perfect start to a protective cab system.
Part Number: 42S02U0410 – Windscreen Kit for MULE SX.
Includes: Windscreen, Wiper, and Washer Kit.
Modular Parts:
Image shown is 022CAT0087A, MULE SX Hard Cabin with Sliding Windows.
Durable and clear windscreen made of high-quality plastic.
Part Number: 022CAT0090 – Windscreen for MULE SX.
*Does not include Wiper and Washer.
Available Modular Parts:
Image shown is 022CAT0087A, MULE SX Hard Cabin with Sliding Windows.
Robust Steel Roof Panel that protects against rain, sun, and snow. Easy to install and adapted for the MULE SX series.
Part Number: 022CAT0091 – Steel Roof Panel for MULE SX.
Available Modular Parts:
Image shown is 022CAT0087A, MULE SX Hard Cabin with Sliding Windows.
Steel with Polycarbonate Rear Panel that protects against dust, dirt, and weather. An important part of a complete cab system.
Part Number: 022CAT0092 – Rear Panel for MULE SX.
Available Modular Parts:
Image shown is 022CAT0087A, MULE SX Hard Cabin with Sliding Windows.
Part Number: 022CAT0093W – Door Set with Sliding Windows for MULE SX.
Provides maximum protection and comfort in the driver's compartment. Designed for use with the Hard Cabin.
Modular Parts:
Image shown is 022CAT0087A – MULE SX Hard Cabin with Sliding Windows.
Provides better visibility in rainy and dirty conditions. Designed specifically for use with the MULE SX Windscreen.
Available Modular Parts:
**Image shown is 022CAT0087A, MULE SX Hard Cabin with Sliding Windows.
Washer System that works with the MULE SX Windscreen. Includes pump, hose, and nozzle.
Part Number: 42S02U02S03 – Washer System for MULE SX.
Available Modular Parts:
Image shown is 022CAT0087A, MULE SX Hard Cabin with Sliding Windows.
The perfect start to a protective cab system.
Part Number: 022CAT0106 – Roof & Windscreen Kit for MULE SX.
Includes: Steel Roof Panel, Windscreen, and Wiper + Washer Kit.
Modular Parts:
Image shown is 022CAT0087A, MULE SX Hard Cabin with Sliding Windows.
Hard Cabin to challenge the elements!
Structure made of high-grade steel with a quality black finish. Flip-up tinted single-layer safety glass windscreen with rubber seals and locks. The doors are equipped with hydraulic stoppers and automotive-style locks. Available in packages and as modular parts.
Package:
Part Number: 022CAT0110C – Hard Cabin Kit with Heater, for MULE PRO-MX.
Includes: Glass Windscreen, Steel Roof, ABS with Polycarbonate (PC) Rear Panel, PC Doors, Wiper and Washer Kit, and Heater Kit.
Modular Parts:
Recommended are the accessory Heavy Duty Springs.
Hard Cabin to challenge the elements!
Structure made of high-grade steel with a quality black finish. Flip-up tinted single-layer safety glass windscreen with rubber seals and locks. The doors are equipped with hydraulic stoppers and automotive-style locks. Available in packages and as modular parts.
Package:
Part Number: 022CAT0111A – Hard Cabin Kit for MULE PRO-MX.
Includes: Glass Windscreen, Wiper and Washer Kit, Steel Roof, ABS with Polycarbonate (PC) Rear Panel, and PC Doors.
Modular Parts:
Recommended are the accessory Heavy Duty Springs.
Hard Cabin to challenge the elements!
Structure made of high-grade steel with a quality black finish. Flip-up tinted single-layer safety glass windscreen with rubber seals and locks. The doors are equipped with hydraulic stoppers and automotive-style locks. Available in packages and as modular parts.
Package:
Part Number: 022CAT0111B – Hard Cabin Kit for MULE PRO-MX.
Includes: Glass Windscreen, Wiper and Washer Kit, Steel Roof, ABS with Polycarbonate (PC) Rear Panel, and PC Doors.
Modular Parts:
Recommended are the accessory Heavy Duty Springs.
Part Number: 022CAT0112A – Half Cabin for MULE PRO-MX.
Includes: Glass Windscreen, Wiper and Washer Kit, Steel Roof, and ABS with Polycarbonate (PC) Rear Panel.
Modular Parts:
Recommended are the accessory Heavy Duty Springs.
Image shown is 022CAT0111B – Hard Cabin Kit.
Part Number: 022CAT0112 – Half Cabin for MULE PRO-MX.
Includes: Glass Windscreen, Wiper and Washer Kit, Steel Roof, and ABS with Polycarbonate (PC) Rear Panel.
Modular Parts:
Recommended are the accessory Heavy Duty Springs.
Image shown is 022CAT0111B – Hard Cabin Kit.
Part Number: 022CAT0113 – Cabin Roof with Windscreen for MULE PRO-MX.
Includes: Glass Windscreen, Wiper and Washer Kit, and Steel Roof.
Modular Parts:
Recommended are the accessory Heavy Duty Springs.
Image shown is 022CAT0111B - Hard Cabin Kit.
The perfect start to a protective cab system.
Part Number: 022CAT0114 – Windscreen Kit for MULE PRO-MX.
Includes: Windscreen, Wiper, and Washer Kit.
Modular Parts:
Recommended are the accessory Heavy Duty Springs.
Image shown is 022CAT0111B - Hard Cabin Kit.
Supplied as a pair (front) with all fixings included, these hardwearing -SBR*- mats feature a honeycomb surface design to ensure high levels of grip in all conditions, model specific full coverage fitment and Mule logos. Due to their nature of rubber, they can reduce noise levels.
*SBR: styrene-butadiene rubber
Supplied as a pair (front) with all fixings included, these hardwearing -SBR*- mats feature a honeycomb surface design to ensure high levels of grip in all conditions, model specific full coverage fitment and Mule logos. Due to their nature of rubber, they can reduce noise levels.
*SBR: styrene-butadiene rubber
Hard Cabin to challenge the elements!
Structure made of high-grade steel with a quality black finish. Flip-up tinted single-layer safety glass windscreen with rubber seals and locks. The doors are equipped with hydraulic stoppers and automotive-style locks. Available in packages and as modular parts.
Package:
Part Number: 022CAT0110B – Hard Cabin Kit with Heater, for MULE PRO-MX.
Includes: Glass Windscreen, Steel Roof, ABS with Polycarbonate (PC) Rear Panel, PC Doors, Wiper and Washer Kit, and Heater Kit.
Modular Parts:
Recommended are the accessory Heavy Duty Springs.
Washer System that works with the MULE SX Windscreen. Includes pump, hose, and nozzle.
Part Number: 42S02U02S03 – Washer System for MULE SX.
Available Modular Parts:
Image shown is 022CAT0087A, MULE SX Hard Cabin with Sliding Windows.
The perfect start to a protective cab system.
Part Number: 42S02U0410 – Windscreen Kit for MULE SX.
Includes: Windscreen, Wiper, and Washer Kit.
Modular Parts:
Image shown is 022CAT0087A, MULE SX Hard Cabin with Sliding Windows.
The perfect start to a protective cab system.
Part Number: 42S02U04-30– Roof & Windscreen Kit for MULE SX.
Includes: Steel Roof Panel, Windscreen, and Wiper + Washer Kit.
Modular Parts:
Image shown is 022CAT0087A, MULE SX Hard Cabin with Sliding Windows.
The perfect start to a protective cab system.
Part Number: 42S02U0410 – Windscreen Kit for MULE SX.
Includes: Windscreen, Wiper, and Washer Kit.
Modular Parts:
Image shown is 022CAT0087A, MULE SX Hard Cabin with Sliding Windows.
Part Number: 42S02U0411 – Door Set with Sliding Windows for MULE SX.
Provides maximum protection and comfort in the driver's compartment. Designed for use with the Hard Cabin.
Modular Parts:
Image shown is 022CAT0087A – MULE SX Hard Cabin with Sliding Windows.
Part Number: 42S05U01S30: Steel Roof Panel for MULE PRO-DXT.
Modular Parts:
Image shown is 022CAT0040 Hard Cabin Kit for MULE PRO-DXT with Doors with Sliding Windows (Discontinued).
Part Number: 42S05U03S40 – Door Panel Set - Left (2 Pieces) for MULE PRO-DXT.
Modular Parts:
Image shown is 022CAT0040 Hard Cabin Kit for MULE PRO-DXT with Doors with Sliding Windows .
Part Number: 42S05U03S50– Door Panel Set - Right (2 Pieces) for MULE PRO-DXT.
Modular Parts:
Image shown is 022CAT0040 Hard Cabin Kit for MULE PRO-DXT with Doors with Sliding Windows .
Part Number: 42S08U01S02 – Heater Assembly for MULE PRO-DX/DXT.
Modular Parts:
Part Number: 42S09U02-9 – Cabin Roof with Windscreen for MULE PRO-MX.
Includes: Glass Windscreen, Wiper and Washer Kit, and Steel Roof.
Modular Parts:
Recommended are the accessory Heavy Duty Springs.
Image shown is 022CAT0111B - Hard Cabin Kit.
The perfect start to a protective cab system.
Part Number: 42S09U0210 – Windscreen Kit for MULE PRO-MX.
Includes: Windscreen, Wiper, and Washer Kit.
Modular Parts:
Recommended are the accessory Heavy Duty Springs.
Image shown is 022CAT0111B - Hard Cabin Kit.
Part Number: 42S09U029 – Cabin Roof with Windscreen for MULE PRO-MX.
Includes: Glass Windscreen, Wiper and Washer Kit, and Steel Roof.
Modular Parts:
Recommended are the accessory Heavy Duty Springs.
Image shown is 022CAT0111B - Hard Cabin Kit.
Heavy-Duty Reinforced Rear Coil Spring.
Increase bottoming resistance when carrying a heavy load and/or when using heavy accessories such as a Hard Cabin.
Reduce cabin noise for occupant comfort.
Vertical shatter-resistant safety glass mirror sits in high-impact plastic housing.
Convex mirror surface increases the driver’s field of rear view. Adaptive 360° bracket rotation provides optimal viewing position.
Mirrors attach directly to vehicle ROPS.
The Headrest offers additional occupant comfort
3D curved safety glass provides increased field of view.
Can also be used in combination with the Hard Cabin for MULE PRO-MX and MULE SX.
Not compatible with the MULE PRO-DX & DXT Hard Cabin with Roof.
Maximize cargo space with this durable, black-finished plastic bed extender—designed to latch securely and work seamlessly with your vehicle.
3D curved safety glass provides increased field of view
Can also be used in combination with the Hard Cabin for Mule Pro-MX and Mule SX. Unfortunately not in combination with the Mule Pro-DX & DXT hard cabin, with roof.
One of our most popular accessories for a good reason.
This item cannot be combined with a windscreen.
Caution: An enclosed trailer is recommended when transporting a vehicle with a Soft Roof installed.
Durable, weatherproof 510g (18 oz) fiber-reinforced PVC laminate material. Installs easily with durable straps. Includes fiberglass support rod to shape the peak.
Fuse Kit with automotive standard compliant relay. Hook up your accessories to this relay instead of directly to the battery.
High-performance LED headlights for improved illumination and better visibility.
High-performance LED headlights for improved illumination and better visibility.
Automatically activates a loud beep sound when shifted to reverse. Easy installation with plunger switch.
Add secure storage within your vehicle’s cargo bed in seconds.
.jpg)
.jpg)
.jpg)
